Connectors and Cable

You can get a full range of Micro-MaTch connectors and ready made cables from a number of sources. Here is a selection available from Farnell, suitable for use with our BMD-S HUB-ee wheels:


PCB and IDC Connectors:

Male 8 way IDC Plug - These can be clamped onto ribbon cable (refer to our crimping guide) to make up your own HUB-ee connectors. If you want you can put a different connector on the other end - for example a 2x4 way 0.1" IDC socket for mating with standard 0.1" pin headers.
TE CONNECTIVITY / AMP - 7-215083-8
Farnell Order Code: 149070

8 Way Female PCB Through Hole.
TE CONNECTIVITY / AMP - 7-215079-8
Farnell order code: 148593

8 Way Female PCB Surface Mount (The same ones we use on the HUB-ee BMD-S PCB)
TE CONNECTIVITY / AMP - 7-188275-8
Farnell order code: 3784733


Ready Made Cables - Each one has a male connector at each end.

8 Way 100mm Male to Male Cable.
TE CONNECTIVITY / AMP - 1483352-1
Farnell order code: 1056213

8 Way 150mm Male to Male Cable.
TE CONNECTIVITY / AMP - 1483352-2
Farnell order code: 1056214

8 Way 250mm Male to Male Cable.
TE CONNECTIVITY / AMP - 1483352-3
Farnell order code: 1056215

Forum Submit